ESP32-S3-Touch-LCD-1.85C is a microcontroller development board with 2.4GHz Wi-Fi and Bluetooth BLE 5 support, integrates high-capacity Flash and PSRAM. Onboard 1.85inch LCD display which can smoothly run GUI programs such as LVGL. Combined with peripheral interfaces, it is suitable for the quick development of the HMI and other ESP32-S3 applications.Equipped with high-performance Xtensa 32-bit LX7 dual-core processor, up to 240MHz main frequencySupports 2.4GHz Wi-Fi (802.11 b/g) and Bluetooth 5 (LE), with onboard antennaBuilt-in 512KB and 384KB ROM, with onboard 16MB Flash and 8MB PSRAMOnboard 1.85inch LCD display, 360x360 resolution, 262K colorSupports capacitive touch controlled via interface, with interrupt supportAdapting UART, and some IO interfacesOnboard audio decoder, Microphone, RTC sensor, TF card slot and battery recharge management module, etc.Supports accurate control such as flexible clock and multiple power modes to realize low power consumption in different scenariosColor: BlackMaterial: ABSPackage Contents:1 * AI Voice Chat RobotOnly the above package content, other products are not included.Note: Light reflection and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.