설명
Features
Compatiable: this Stepper Motor Driver Use removable A4988 or DRV8825 compatible stepping driver
Mainly Function:The extension board can be used for engraving machine or 3D printer driver
Single Channel Support: Compatible with GRBL 0.8. Open‑source firmware , converting G code command into stepping signal
PWM spindle and direction pin, 4 shaft support (X, Y, Z, A ‑ you can copy X, Y, Z or use pin D12 and D13 customize firmware perform complete shaft 4)
Match Kit: Compact design, stepping motor can connect 4 pin connectors or be soldered
Specifications:
CNC Expansion Board:
Version: V3.0
Color: Red
Size: 68 x 53 x 18mm / 2.67 x 2.08 x 0.7"
Voltage: DC 12V to 36V (only DRV8825 driver can handle up to 36V, so please consider voltage for power supply)
4pcs A4988 Driver:
Color: Red
Size: 20 x 15mm / 0.78 x 0.59"
Thermal Shutdown Circuit: Yes
Cross Current Protection: Yes
Ground Fault Protection: Yes
Short Circuit Protection: Yes
Compatible Logic Voltage: 3.3V and 5V
Five Step Modes: Full, 1/2, 1/4, 1/8 and 1/16
Mix with slow current attenuation model.
Internal UVLO and low RDS (on) output.
Automatic current attenuation mode Detection/Select.
Phase-in rectifier, low power consumption.
Warning: Connecting or disconnecting stepping motor while driver is powered on might damage driver.
4pcs Heat Sinks:
Size: 8 x 8mm / 0.31 x 0.31"
Color: White
Package Includes:
1 x V3 Extension Board
4 x Drivers
4 x Heat Sinks
Package List
-
Fruugo ID:
383758217-825978776
-
EAN:
9789622133075
제품 안전 정보
아래에 설명된 이 제품과 관련된 제품 안전 정보를 참조하십시오.
以下の情報は、この製品を販売する独立したサードパーティ小売業者によって提供されています。
제품 안전 라벨
안전 경고:
Please do not allow your child to handle this product alone to avoid swallowing or other injuries; adult supervision is recommended.
재료:
As shown in the figure