Used to lift and lock the adjustable awning arms For A & E Models 8500 & 9000 Part Number 830644 Installation Instructions Drill out rivets of existing handle using a 3/16inch bit or remove screws. Place lift handle in punched slot of main arm and align rivet holes. Insert rivet through hole in main arm. Place hex nut over rivet shaft and tight against riven shoulder. If nut is not used, rivet will not seat properly for securing. Secure handle by pulling rivet tight with pop rivet gun. Repeat steps 3-5 on second rivet. Colour:As Shown Material:ABS+Metal Package Contents: 1 x Lift Handle 2 x 3/16inch Pop Rivets 1 x Hex Nut Only the above package content, other products are not included. Note: Light reflection and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.