8-Channel MOSFET Microcontroller PLC with PWM Control and Optocoupler Isolation for Electronics Projects

Power supply mode DCContinuous output current 2AInput voltage 48VSuitable motor DCMaximum applicable motor capacity 60W. Maximum output current 3AInterface1. VCC Connect to the positive pole of DC 5V power supply2. GND Connect the negative terminal of the DC 5V power supply, which needs to be grounded together with the signal terminal3. IN1-IN8 Connect to the IO port of a microcontroller or PLC4. H/L jumper H is high level, L is low level, and the middle is the common terminal5. VIN Load side power supply DC positive level, GND Load side power supply DC negative pole6. Connect the load terminals OUT1-OUT8 to the positive pole of the load deviceConnect the load terminal GND to the negative terminal of the load device1. Indicator light The 5V version comes with an indicator light, which lights up when there is a signal2. Application scenario The output end can control high-power DC devices such as motors, light bulbs, LED light strips, DC motors, Micro-water pump solenoid valves, etc PWM can be input to control motor speed, light brightness, etc3. The voltage range of the control terminal is DC 5V-DC48V. As the control board has not undergone high-power heat dissipation treatment, it is recommended that the single power should not exceed 60W4. The control end and signal end are isolated by optocouplers, please feel free to useSpecifications A5V versionColor As ShownMaterial plasticPackage Contents1 x 8 Channel MOS Module