XIANQI 600v 50a Battery Trailer Quick Charge Plug. Features: 1. This Connector Kit Allows for Quick and Convenient to Connect Disconnect Power from a Winch or Other Electrical Device Such As a Remote Control Battery Charger, Trailer, Etc. It is Made of Durable Polycarbonate Allowing for over 10,000 Connect Disconnect Actions. The Lower Part of the Testament Disposition Has a Fully Equipped Rubber Boot for Protection Against Dust, Moisture and Corrosion. 2. Both Ends Are Suitable for Connection to Power or Side of the Load Because of Its Identical Connectors. The Ends Are Made to Connect Only One Way, Which Makes It. 3. Impossible to Connect the Wrong Polarity for Another. The Connectors Are Ideal for 12-36 Volts DC Low Voltage and Direct Current Use. 4. The Heavy Duty Components Are Ideal for Low or Medium Current Use. Featured with 0.25 "internal Diameter, the Pin Terminal Accept Wire 6AWG, 8AWG, 10-12AWG. 5. It is Very Easy to Use and Install. Insert the Wires into the Pin Terminal, then Solder or Crimp Them. Insert the Pin Terminal into the Housing Connector and Lock in Place. Specifications: Colour: Red Plug: Polycarbonate Plug Contact Material: Copper, Silver Plating Nominal Current Ampere: 50A Nominal Voltage Output Voltage: 600 V Contact Barrel Wire Size: 610 12AWG Maximum Insulation Wire Diameter: 0.44 inches, 11.2 mm Flammability of Enclosure Material: UL94 V-0 Operating Temperature Range: -20 to 125 Size:as the Show Picture Package Included: 2 * Connector 4 * Terminals 2 * Dust Cover Note: 1 All Pictures Are Professionally Colored, but Due to the Different Ambient Light and Different Display Device Settings, There May Be Some Deviations Between the Pictures You See and the Items Themselves. Please Understand. 2 The Data is Measured Manually, and There May Be Some Deviation, but It Does Not Affect the Use.