Original LCD Screen for Xiaomi Mi 10T 5G, Mi 10T Pro 5G, Redmi K30S, M2007J3SC, M2007J3SY with Digitizer Full AssemblyAbout the product 1. Replacement LCD screen and touch screen digitizer assembly for Xiaomi Mi 10T 5G, Mi 10T Pro 5G, Redmi K30S, M2007J3SC, M2007J3SY 2. Replace your broken or non-functional screen with a new one 3. Restore your device to a like-new appearance 4. Designed for precise fit and full functionality 5. Each unit is tested and inspected before shipping 6. Professional installation is highly recommended. No responsibility will be taken after installationBefore Installation Notes Tip 1: Test before installation When testing, do not remove any protective films or labels. Be aware of static electricity. Before beginning any repair, ground yourself using an ESD (electrostatic discharge) strap to prevent damage to internal components. Wear eye protection and handle glass components carefully to avoid injury from sharp edges.Tip 2: Test the screen before final installation Screen replacements are fragile. Test the display before fully installing. Disassemble the phone, connect the motherboard to the new LCD/screen assembly, attach the flex cable, power on the device, and complete testing. If the screen functions properly, proceed with full installation. If there is no display, immediately. Do not force installation if the screen does not work. No responsibility will be accepted after installation.Tip 3: Avoid excessive bending of the cable Do not bend the LCD flex cable beyond 90 degrees. Excessive bending may result in display failure or black screen.