["Feature:\r\nThis adhesion promoter is supplied in an easy-to-use sponge applicator packet.\r\nThe liquid contents of the packet should be completely used as soon as possible after opening.\r\nApply promoter only to the areas that will be fully covered with tape.\r\nThe primer should be dry before applying tape.\r\nFor best results, apply tape immediately after primer application or no more than one hour after primer application.\r\nBe sure the primed surfaces remains free from contaminants prior to tape application.\r\nIncreases bonding strength of any double sided tape.\r\n\r\nTips for using\r\n1: Surface Preparation: \r\nThe bonding surface must be relatively clean and dry. \r\n2: THIS IS NOT A GLUE AND CANNOT BE USED SOLELY AS A GLUE. \r\nTHE ADHESION PROMOTER IS FOR BETTER ADHESION OF YOUR TAPE. \r\nYOU NEED TO APPLY IT ON A TAPE OR ANYTHING ADHESIVE.\r\n3:Clean-up:\r\nContaminated surfaces should be cleaned\r\nwith a 50/50 Isopropyl Alcohol and water mixture.\r\nVigorous scrubbing may be required.\r\n\r\nApplication:\r\n - Leave the primer 94 for a few minutes before applying tape. \r\n This is usually accomplished in 5 minutes at normal temperature.\r\n - Avoid any contacts with eyes and skin.\r\n - This product is unsuitable for kids.\r\n\r\nType: Primer\r\nPrimer is for plastic materials. \r\nFor use with acrylic.\r\nQuantity:50 Pcs\r\n\r\nPackage include:\r\n50 Pcs x Adhesion Promoters."]