Item Type: Hall Effect SensorMaterial: ABSModel: H12N1 NControl Output: 100mASensing Distance: Approx. 10mm/0.4inPower Supply Voltage: DC 5-30VRated Current: 30MAResponse Frequency: 2KHzWorking Environment Temperature: -20 to 80Application: Hall sensor is applicable to the position measurement of pneumatic, hydraulic, cylinder and piston, and can also be used as limit switchFeatures:1. When the magnetic wooden plaque is close, Hall effect will be generated, and the switch signal will be output after amplification2. Compared with inductive sensor, it has the following advantages: can be installed in metal, can be installed side by side, and can pass through metal for detection3. The distance will be affected by the magnetic field strength and the approaching direction of the detected object. Please pay attention to selecting the magnetic field polarity direction S or N .wang-edit-text{ font-family:'Arial' !important; } .wang-edit-text table { border-top: 1px solid #000; border-left: 1px solid #000; } .wang-edit-text table td, .wang-edit-text table th { border-bottom: 1px solid #000; border-right: 1px solid #000; padding: 3px 5px; } .wang-edit-text table th { text-align: center; } 1Multi Purposes: Hall sensor is applicable to the position measurement of pneumatic, hydraulic, cylinder and piston, and can also be used as limit switch. 2Metal Usage: Compared with inductive sensor, Hall sensor can be installed in metal, side by side, and can pass through metal for detection. 3Hall Effect Generation: When the magnetic wooden plaque is close, Hall effect will be generated, and the switch signal will be output after amplification. 45 Pcs Set: The set contains 5 pcs Hall effect sensors, with a wide power supply voltage of DC5V to 30V, ensures wider applications. 5NPN Normally Open: The Hall switch sensor is NPN normally open type, the sensing distance is 10mm, practical and useful.