Water flow mainly consists of plastic valve body, rotor assembly and Hall Current Sensor.It is installed inlet end for detecting water flow. When water through rotor assembly, Magnetic rotor will rotate and Speed will change as change. Hall Current sensor output corresponding Signal and controller, then the controller will control . Can use for Water heaters, credit card machines, water vending machine, flow measurement device. Features: weight, , install. Inlaid with stainless steel impeller shaft, durable wearable. with the upper and lower force structure never leaks. Precautions: Non-violent shock, and chemical erosion. Non-throwing or hitting. Mounted vertically, should not exceed 5 degrees inclination. Temperature of Medium should not exceed 120 ℃ Cord Connection: Red: Positive(+) Yellow: Signal output. Black: Negative(-) Specification: Working voltage range: DC 3.5~12 v Working current range: 0.5-1.5mA Work temperature: 1- 100 ℃ Allowing pressure: ≤ 0.8Mpa Electric strength: >600VAC Insulation resistance: >100