4.3inch LCD Touch Display for , 800x480 resolution, IPS screen wide angleSupports Pi 4B/3B+/3A+/3B/2B/B+/A+, CM3/3+/4(CM3/3+/4 requires extra adapter board)Supports Raspbian, 5-points touch, driver Supports / / WIN10 IoT, single point touch, driver Supports Retropie, driver 1. Capacitive , support up to 5-point touch2. interface, refresh rate up to 60Hz3. Tempered glass capacitive , hardness up to 6H4. When used with , supports OS / / and Retropie, driver .5. Supports software control of backlight brightnessHardware connectionConnect the interface of 4.3inch LCD to the interface of .For easy use, you can fix the on the backside of the 4.3inch LCD by screwsSoftware settingSupports OS / / and Retropie for .1) Download image from the website.2) Download the compressed file to the PC, and unzip it to the . file.3) Connect the TF card to the PC, use SDFormatter software to the TF card.4) Open the Win32DiskImager software, select the system image downloaded in , and click 'Write' to write the system image.5) After the image has finished writing, save, and quit the TF card safely.6) Power on the and wait for a few seconds until the LCD displays normally. And the touch function can also work after the system starts.color:Blue+blackMaterial:PCBPackage Contents:1 x 4.3inch LCD1 x FPC 15PIN 1.0 pitch 50mm (opposite sides)1 x Screws pack