400W AC 220V Motor Speed Controller Pinpoint Controller Forward and Reverse ControllerProduct Description:The governor has 6 wires, the black wire is the main motor line, the red and white are the auxiliary capacitive lines, and the two blue wires are the speed feedback lines. The green line is the ground wire. Widely used in packaging, printing, food, electronics, instrumentation, medical equipment, garment industry production line as speed drive device. Technical data:Working power supply: AC220V 50/60Hz, positive and negative voltage fluctuation range 10% Ue; Rated Power: 400W Environment Use: - 10 - +50 C Relative Strength:lt; 90%. Speed Range: 90-1400r/min 50Hz, 90-1700r/min 60HzShape Size: 115*100*60mm/4.53*3.94*2.36", Panel Size: 100*60mm/3.94*2.36", Machine Depth: 87*80*52mm/3.43*3.15*2.05" Usage:1. Turn off the power, connect according to the wiring diagram, and confirm the correct wiring connection, do not modify arbitrarily;2. Fixed the controller and set the speed to the lowest "0" to avoid momentary high current and permanent damage during power start-up.3. Then turn on the power, adjust the speed knob to the desired position, turn off the power when not needed;4. Adjust the tuning potentiometer (speed setting adjustment) on the side of the product if the connection between the regulator and the motor does not meet the distance or speed requirements.5. To change the direction of the motor, only the CCW and CW jumper on the connection seat at the rear of the control unit are replaced. Select the short connection of COM and CW, then the motor rotates clockwise. Select the short connection of COM and CCW, then the motor rotates counterclockwise.6. The action switch only controls the motor to operate or stop and does not interrupt the power supply. If it is not used for a long time, please turn off the power. (When changing direction, the motor must come to a complete stop before it can be changed.)Notes:1. Due to the different monitor and light effect, the actual color of the item may be slightly different from the color showed on the pictures. Thank you!2. Please allow slight measurement deviation due to manual measurement.1 x Motor Speed Controller1.