4-in-1 Wall Finder Metal Detector with LCD Screen - Stud Finder & Electric Cable Detection Wall Scanner for Home Use

₩111,590
무료 배송

4-in-1 Wall Finder Metal Detector with LCD Screen - Stud Finder & Electric Cable Detection Wall Scanner for Home Use

  • 브랜드: Unbranded

4-in-1 Wall Finder Metal Detector with LCD Screen - Stud Finder & Electric Cable Detection Wall Scanner for Home Use

  • 브랜드: Unbranded
희망소매가격: ₩206,690
가격: ₩111,590
절약 금액: ₩95,100 (46%)
판매자::
₩111,590
무료 배송

재고 있음

다음의 결제 방식을 사용하실 수 있습니다

설명

New ModelsWide Application: This finder can be used to detect the position of the center of wood rod in the walls of wooden planks and plasterboard, as well as the position of metal and AC cables, so that you can accurately install TVs, cabinets, drill holes in the wall, etc.4-in-1 detection mode: This stud finder has 4 different modes that can be switched: stud scanning , Deep Mode, Metal Scan and AC Scan.Multifunctional: Stud Scan is used to find and locate the center and edge of wood and metal studs with a depth of 19mm The maximum deep scan positioning depth is 38 mm Maximum metal detection depth reaches 60mm AC Scanning can detect AC wires with a depth of 51mm.Screen display and alarm prompt: During the detection process, the display screen will show the detection mode , signal strength, direction indication, etc. Also, the intensity of the buzzer will vary depending on the distance between you and the target, you can mark the position with a marker when the sound is loudest. And it has AC warning function.Easy to calibrateYou need to calibrate the detector before every scan. You first select the mode, then press and hold the scan button (on the right side of the tool) to calibrate the tool. Calibration is complete when the dimming bar disappears and a beep sounds. In metal or AC mode, you need to place it in the air for calibration.Product DescriptionWide ApplicationThis finder can be used for detect the position of the center of the wood rod in the walls of wooden planks and plasterboard, as well as the position of metal and AC cables, so that you can accurately install TVs, cabinets, drill holes in the wall, etc.How to calibrateYou must calibrate the detector before each scan. You first select the mode, then press and hold the scan button (on the right side of the tool) to calibrate the tool. Calibration is complete when the dimming bar disappears and a beep sounds. If you accidentally shake the scanner, you need to recalibrate the device. In metal or AC mode, you need to place it in the air for calibration.SpecificationColor: Black and silverPackage included:Wall sensorx1Batteryx1
  • 브랜드: Unbranded
  • 카테고리: 센서
  • Fruugo ID: 392380352-839506063
  • EAN: 9107337647340

배송 및 반품

2일 이내에 발송됨

  • STANDARD: 무료 - 배달 사이 수 22 10월 2025–화 28 10월 2025 - 무료

중국에서 발송.

당사는 귀하께서 주문하신 제품이 주문 명세에 따라 빠짐없이 배송되도록 온 힘을 기울이고 있습니다. 다만, 주문하신 것과 다른 상품이 배송되거나 빠진 상품이 있는 경우, 또는 주문 내용에 만족할 수 없는 다른 이유가 있는 경우에는 주문 전체나 주문에 포함된 일부 제품을 반품하시고 해당 상품에 대해 전액 환불받으실 수 있습니다. 전체 반품 정책 보기

製品コンプライアンスの詳細

以下に概説されているこの製品に固有のコンプライアンス情報を参照してください。

以下の情報は、この製品を販売する独立したサードパーティ小売業者によって提供されています。

제조사:
다음 정보는 Fruugo에서 판매되는 관련 상품의 제조사 연락처입니다.

  • Zhuzhou Kemai Trading Co., Ltd
  • Zhuzhou Kemai Trading Co., Ltd
  • Shop No. 106-M105, No. 3 Factory, No. 3, Baiguan Industrial Park, No. 136, Dongfu 2nd Road
  • Zhuzhou
  • CN
  • 412002
  • hulking2025@163.com?
  • 19377106697

EU 내 책임자:
다음 정보는 EU 내 책임자 연락처입니다. 책임자는 유럽 연합에서 판매되는 관련 상품에 대한 준수 의무에 책임을 지는 EU에 기반을 둔 지정 경제 주체를 말합니다.

  • Jean Luc
  • In Memoria Futuri SAS
  • 3 RUE DU PAS DE LA MULE 75004 PARIS
  • Paris
  • FR
  • 75004
  • infoapexchen@gmail.com
  • 33 745713901