Output state on power up and control behavior You can select the output state after power on. If there is resistance at point A, the output is closed after power on. If there is no resistance at point A, the voltage is output after power on. Touch switch features and capabilities Type and mode: Touch type single key bistable switch that can be set to selflocking or inching mode. Sensing distance: Maximum sensing distance up to 8 mm. Applications: Suitable for touch switch control on acrylic panels, casings, and veneers. Electrical specifications and driving capability Working voltage: DC 3 to 30 V Maximum output current: 2.5 A Load compatibility: Can directly drive various lowpower electrical appliances, lamp belts, LED lamps, and other similar devices. Use scenarios Scenario 1: Install on an acrylic panel to enable touchbased control of an LED strip or lighting setup. Scenario 2: Integrate into a furniture veneer or cabinet front to switch lighting or small electrical components. Scenario 3: Use inside decorative casings or enclosures to operate lowpower appliances such as LED lamps or related lighting fixtures.