3D Scanning Markers 6mm Reflective Tracking Dots 10 Sheets Reusable Adhesive Reference Points for 3D Scanner

3D Scanning Reflective Marker Sheets 560 Pieces (10 Sheets x 56 Markers) Overview These adhesive reflective markers are designed to improve tracking and alignment for 3D scanning, motion capture, reverse engineering, and inspection workflows. Each sheet contains 56 reusable PET reflective markers that offer reflectivity, strong adhesion, tear and sun resistance, and good ink absorption for marking or labeling. Key Features Size and quantity: 560 markers total; 10 sheets, 56 markers per sheet. Inner diameter 3 mm (0.12 in), outer diameter 6 mm (0.24 in), thickness 0.15 mm (0.006 in). Material and performance: PET reflective film with reflectivity and durable surface that resists tearing and sun exposure. Markers absorb ink for added reference options and can be reused when removed carefully. Adhesive design: Pressuresensitive adhesive for easy application and clean removal from most surfaces. User friendly for beginners and experienced operators. Optical compatibility: Reflects light emitted by data equipment, typically infrared light, making them suitable for a wide range of optical tracking and scanning devices. Practical packaging: Supplied as 10 peeloff sheets for organized storage and quick access during scanning sessions. Benefits and Why You Need Them Improve scan accuracy: Provide consistent, contrast reference points on featureless or reflective surfaces to enhance alignment and reduce registration errors. Save setup time: Precut, easytoplace markers speed up the targeting and calibration process for scanners and motion capture systems. Versatile and reusable: Works on components that are difficult to track optically, and can be repositioned or replaced without damaging most surfaces. Durable in field use: Tearresistant and sunresistant construction supports outdoor and extended use where reliable reflectivity is needed. Typical Applications Reverse engineering: Add reliable reference points to automotive parts, molded components, and other lowfeature objects to improve 3D scan results. Motion capture and gait analysis: Use on markers for human motion studies or biomechanical assessments where infraredbased tracking systems are employed. Quality control and inspection: Apply to jewelry, small machined parts, or assemblies to assist in optical inspection and dimensional verification. Optical surveying and meteorology: Provide consistent reflectivity for tracking systems used in surveying setups and certain instrument calibration tasks. How to Use Peel a marker from the sheet and press onto a clean, dry surface. Position markers as required for scanner or motion capture calibration. Remove carefully after use; markers can be reused if adhesive and reflective surface remain intact. Specifications Item type: 3D scanning marker Material: PET reflective film Inner diameter: Approx. 3 mm / 0.12 in Outer diameter: Approx. 6 mm / 0.24 in Thickness: Approx. 0.15 mm / 0.006 in Performance: reflectivity, strong adhesion, tear and sunproof, ink absorption, reusable Quantity: 10 sheets, 56 markers per sheet, total 560 markers Package Contents 10 sheets x 3D scanning markers (1 sheet = 56 pieces)