설명
3.3V PWM Signal to 0-10V Voltage Converter D/A Digital-Analog PLC Module
Features
1、1. This module can convert 0-100% PWM digital signal into analog signal.
2、2. The input digital signal can be a 0-100% PWM signal of 3.3V level.
3、3. The output analog signal can be 0-10V voltage.
4、4. Widely used in signal interface switching of PLC, single chip or other industrial control board.
5、5. The power supply has reverse polarity protection function.
Specification
Features:
1. This module can convert 0-100% PWM digital signal into analog signal.
2. The input digital signal can be a 0-100% PWM signal of 3.3V level.
4. Widely used in signal interface switching of PLC, single chip or other industrial control board.
5. The power supply has reverse polarity protection function.
Specification:
1. Model: 3.3P-5V
2. PWM Signal Receive Frequency Range: 100HZ-3KHZ (1-3KHZ is recommended)
3. Insert the jump pin at 5V
After power-on, when there is no input signal, the output is 0V
6. Output Power: About 10MA
7. Mounting Method: 4 * M3 screw hole
Port:
1. DIN+: Positive of PWM signal (For common cathode, connect it to PWM signal; For common anode, connect it to 3.3V of signal terminal)
2. DIN-: Negative of PWM signal (For common cathode, connect it to GND; For common anode, connect it to PWM signal)
3. 12-30V: Positive of power supply
4. GND: Ground of power supply
5. GND: Ground of power supply. It is connected to ground of power supply
Package List:
1 * Digital-Analog PLC Module
Package List
-
Fruugo ID:
339983430-745787627
-
EAN:
6117160252287
제품 안전 정보
아래에 설명된 이 제품과 관련된 제품 안전 정보를 참조하십시오.
以下の情報は、この製品を販売する独立したサードパーティ小売業者によって提供されています。
제품 안전 라벨
안전 경고:
Please do not allow your child to handle this product alone to avoid swallowing or other injuries; adult supervision is recommended.
