Electronic Speed Controller Governor 3044196 Generator Speed Control Board Overview: This 3044196 electronic speed controller with full closed-loop control technology, it is the moment to load changes with fast and accurate response to control engine speed, when connected to the matching EFC Series electric actuators and magnetic speed sensor signal , can be perfectly controlled CUMMINS engine. In the design, it is easy to install and can be pre-adjustments, including adjusting the idle speed and work, to assist for input multiple machines or special purpose machines, as well as to prevent reverse battery voltage, transient voltage pulse implementation of the short-circuit fault and security in case of loss of speed sensor signal or power supply and so on. Features: 3044196 electronic speed controller, stable performance. Full closed-loop control technology. Fast and accurate response to control engine speed It is easy to install and can be pre-adjustments. For input multiple machines or special purpose machines. Specification: Condition: Model: 3044196  Rotational speed stability: better than 0.25% Speed range: 1KHz to 6.5khz Thermal stability: maximum ±0.7% IDLE adjustment: 260±20Hz~ 85% of rated speed DROOP adjustment: Minimum position: 15Hz±6Hz/ change of load current per ampere Maximum position: 400Hz±75Hz/ ampere load current variation External speed regulation: ± 200 Hz (external 1Ωk) AUX input sensitivity: 148Hz / 1V, ±10Hz, impedance 1mΩ  Environment: Operating temperature range: - 40 ℃ ~ 85 ℃ Working humidity range: 95% Max Temperature: - 55 ℃ ~ 92 ℃ Vibration: 20-100hz 500mm/Sec. Input power: Power supply voltage: 12V and 24V DC battery system Ground polarity: negative Power consumption: 40mA Actuator continuous current: Minimum 1A; Maximum 4.5A  Speed sensor signal: 2~120V RMS Package List: 1 * Generator Speed Controller Note:  The above performance parameters are measured at the operating frequency of 3800Hz.