1) Converts your video-enabled DSLR into a handheld video camera 2) Magnification: 2.8x 4) Optical lens 5) Easy to install and dust resistant 6) 180-degree viewing angle, suitable for right or left eye use 7) Magnetic bracket enables quick installation and removal without damaging the camera 8) Compatible with Canon 600D / 60D / T3i 9) Enhances LCD visibility in bright outdoor conditions * Application guide: - Allow your camera to record for approximately 12 minutes before and after applying the frame. The moderate heat generated during recording helps establish a strong initial bond between the metal interface and the camera body. - When applying the interface frame, set the camera to display a bright full-screen image, such as the menu screen at maximum brightness, to assist in accurate and even placement. - Remove the paper backing and carefully apply the frame to the camera body, ensuring even alignment around the LCD. - Apply firm pressure with your fingers to improve adhesion between the frame and camera. - Place a light weight on the newly applied frame for at least 15 minutes while the camera is recording; the heat generated will enhance bonding, especially if time is limited. - Initial bond strength of approximately 76% is achieved after 15 minutes.