2x Natural Nylon PA66 M4 x 500mm Threaded Rods, Plastic Studding + 4 Nuts

BP1: 2x threaded rods. 4 nuts included. Material: Nylon Polyamide 66 / PA66. Colour: Natural. Size: M4 x 500 mm. Diameter: 4mm. Pitch: 0.7mm. SKU: 966.. BP2: PA66 balances toughness and abrasion resistance in a slim M4 format, giving a practical non-metal thread for light mechanical work.. BP3: Moisture note — nylon can absorb some moisture, so check thread fit and dimensions if the part will be used in damp conditions.. BP4: The 500 mm length gives usable stock for trimming into smaller threaded sections with suitable cutting tools.. BP5: Use for cut-to-length spacers, light guide rods and small fixture positions that need the slimmer M4 thread, with careful tightening and checks for plastic-thread suitability.. || PRODUCT DESCRIPTION SUMMARY: These M4 x 500 mm natural PA66 threaded rods are supplied as 2 fully threaded plastic rods. PA66, also called nylon polyamide 66, is a tough engineering plastic with useful wear resistance and good low-friction behaviour for nut fitting in light assemblies. This size is suited to cut-to-length spacers, light guide rods and small fixture positions that need the slimmer M4 thread where a lighter non-metal rod is preferred. Nylon can absorb some moisture, so check thread fit and dimensional tolerance in damp or changing environments. Cut with suitable tools, avoid over-tightening the plastic thread and confirm material suitability before final use. Supplied with 4 nuts.. || Please see the technical image illustration for size references. All measurements are in millimetres/millimeters. || Product Details: Size_Ref: M4 x 500mm. Colour_Ref: Natural. Material_Ref: Nylon / Polyamide 66. Type_Ref: Threaded Rods. Quantity_Ref: 2. || Dimensions (L x W x D mm): 500 x 4 x 4. || Additional Specifications: Pitch_MM: 0.7. Washer_Dimension: Nut_Dimension: Bolt_Dimension: Material: Nylon Polyamide 66, Head/Drive Type: Fully Threaded Rod, size: M4 x 500, D: 4 mm, Pitch: 0.7 mm, L: 500 mm