_x000D_ _x000D_ _x000D_ _x000D_ _x000D_ _x000D_ _x000D_ _x000D_ _x000D_ _x000D_ Features:_x000D_ Features a single durometer blade with flat bottom.Single piece of polyurethane material._x000D_ Designed to balance the squeegee's resistance to all types of different inks.Maintains a high resistance to abrasion._x000D_ Features a classic style contoured wooden handle.Smooth Hardwood Finish._x000D_ Measurement (Length): 8 inch.Approximately 1.5 inch of Polyurethane is exposed from the wooden handle._x000D_ _x000D_ Introduction:_x000D_ Squeegee is also called scraper, it is one kind of tool that used to scratch the ink on the screen to make it leak to the substrate. Use for both graphic and textile applications, for all hand printing and many machine applications._x000D_ These squeegees are Kiln-dried and precision cut lumber is used for the no-warp handles, which are smooth, comfortably shaped and easy to handle, helping in eliminating any symptoms of carpal tunnel syndrome. Blades are molded under high heat and pressure and have a tensile strength of more than 2,000 lbs. This eliminates ink streaking and provides a superior long-lasting printing edge._x000D_ Specification:_x000D_ Material: rubber, Wood_x000D_ Hardness: 70 Durometer_x000D_ Length: 20cm/7.9 inch_x000D_ Width: 10cm/3.9 inch_x000D_ Thickness: 2.3cm/0.9 inch_x000D_ Color: As shown_x000D_ Package Included:_x000D_ 2 x 70 Durometer 20cm Screen Printing Squeegee Blade_x000D_ Note:_x000D_ A Durometer Instrument or Gauge was not used to test hardness of the squeegee. The hardness of squeegee material usually falls between 50 and 90 with 50 being the softest and 90 being the hardest. In our opinion these are medium-soft as they are somewhat pliable and if you press your nail into the rubber it will leave an indentation. We would give this a rating of 60, being Medium-Soft._x000D_ _x000D_ Only the above package content, other products are not included._x000D_ Note: Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm._x000D_ _x000D_ _x000D_ _x000D_ _x000D_ _x000D_ _x000D_ _x000D_ _x000D_ _x000D_ _x000D_ _x000D_ _x000D_ _x000D_ _x000D_ _x000D_ _x000D_ _x000D_ _x000D_ _x000D_ _x000D_ _x000D_ _x000D_ _x000D_ _x000D_ _x000D_ _x000D_