2.8 inch Serial 240*320 SPI Color TFT LCD Panel Serial Port Module

₩34,090
무료 배송

2.8 inch Serial 240*320 SPI Color TFT LCD Panel Serial Port Module

  • 브랜드: Unbranded

2.8 inch Serial 240*320 SPI Color TFT LCD Panel Serial Port Module

  • 브랜드: Unbranded
희망소매가격: ₩52,090
가격: ₩34,090
절약 금액: ₩18,000 (34%)
판매자::
₩34,090
무료 배송

재고 있음

다음의 결제 방식을 사용하실 수 있습니다

설명

Features 1、2.8 inchTFT LCD Module, 240x320 High resolution 2、2.8inch, 4-wire SPI serial bus, driver chip is ILI9341 3、This 2.8 inch TFT LCD Module can be can be easy controlled,such as AVR, STM32. 4、It can be used in any embedded systems which require display high quality colorful image 5、Perfect upgrade true color Specification Descriptions: This 2.8" TFT LCD module, 240x320 high resolution, can be can be easy controlled, such as AVR, STM32,It can be used in any embedded systems which require display high quality colorful image. Features: 2.8" TFT LCD Module, 240x320 High resolution. 2.8inch, 4-wire SPI serial bus, driver chip is ILI9341. This 2.8" TFT LCD Module can be can be easy controlled, such as AVR, STM32. It can be used in any embedded systems which require display high quality colorful image. Perfect upgrade true color. Support 3.3V input voltage Specification: Material:LCD Screen Size: 2.8 inch Control chip: ILI9341 Resolution: 240*320 Display area: 43.20(W)*57.60(H) Interface type: 4-wire SPI interface Number of pins: 18pin Display color: 262K full color Working temperature: -20~70 degrees Pixel size: 0.18*0.18 (mm) Working voltage: 3.3V Display type: TFT Weight:16g Structure: Interface: PIN No. Symbol Description 1 GND Ground 2 RESET LCM Reset pin Signal is active low. 3 SCL This pin is used serial interface clock in 4-wire 8-bit serial data interface. If not used, this pin should be connected to IOVCC or GND. 4 D/C -4-line system (D/CX): Serves as command or parameter select. Fix to IOVCC level when not in use. 5 CS Chip select pin ("Low" enable) 6 SDA Serial input signal. The data is applied on the rising edge of the SCL signal. If not used, fix this pin at IOVCC or GND 7 SDO Serial output signal. The data is outputted on the falling edge of the SCL signal. If not used, open this pin 8 CND Ground 9 VCC Power supply for LCM (2.8V-3.3V) 10 LEDA Anode of Backlight (3.0V-3.4V Typical:3.2V) 11 LEDK1 Cathode of Backlight 12 LEDK2 Cathode of Backlight 13 LEDK3 Cathode of Backlight 14 LUDK4 Cathode of Backlight 15 XL Touch panel control pin 16 YU Touch panel control pin 17 XR Touch panel control pin 18 YD Touch panel control pin Package Included: 1x TFT LCD Display (without touch panel) Note: This model without touch panel Package List
  • 브랜드: Unbranded
  • 카테고리: 변조기
  • Fruugo ID: 271671693-602233445
  • EAN: 9367397101040

제품 안전 정보

아래에 설명된 이 제품과 관련된 제품 안전 정보를 참조하십시오.

以下の情報は、この製品を販売する独立したサードパーティ小売業者によって提供されています。

제품 안전 라벨

CE Mark
안전 경고: Please do not allow your child to handle this product alone to avoid swallowing or other injuries; adult supervision is recommended.

배송 및 반품

2일 이내에 발송됨

  • STANDARD: 무료 - 배달 사이 화 28 10월 2025–월 03 11월 2025 - 무료

중국에서 발송.

당사는 귀하께서 주문하신 제품이 주문 명세에 따라 빠짐없이 배송되도록 온 힘을 기울이고 있습니다. 다만, 주문하신 것과 다른 상품이 배송되거나 빠진 상품이 있는 경우, 또는 주문 내용에 만족할 수 없는 다른 이유가 있는 경우에는 주문 전체나 주문에 포함된 일부 제품을 반품하시고 해당 상품에 대해 전액 환불받으실 수 있습니다. 전체 반품 정책 보기