Changelog: June 5th,2022: this flight controller has started to use a new MOS tube, the appearance has changed, but the performance is the same as before. June 14th,2022: Gyro updated to 42688 June 25th,2022:Mounting Hole Size changed from 26.5脳26.5mm to 25.5脳25.5mm. Specification: ( Manual) Model Name: GEP-F722-45A AIO V2 MCU: STM32F722 IMU: 42688 gyro/accelerometer(SPI) Firmware target: GEPRC_F722_AIO OSD: Betaflight OSD w/ AT7456Ev UART Ports: R1 T1 / R2 T2 / R3 T3 / R4 T4 / R5 T5 Beeper: YES LED: YES USB: Micro USB BEC output: 5V@1A Intergrated LC Filter ESC MCU: 8BB21F16G Continuous current: 45A MAX current: 55A (10s) Input: 2~6S Supports: Dshot600,Oneshot,Multishot BlackBox: 16Mb Traget: G_H_30 Size: 32x32mm Board Mounting Hole: 25.5脳25.5mm Weight: 8.8g Features: - MCU:STM32F722,with strong performance and higher computing speed. - It has 5 full UART ports, which can connect more external devices - Design 6p connector for DJI AIR UNIT MODULE, and just plug and play . - The BLheili_S 45A ESC can handle 45A continuous current(55A burst), totally support the 2- -6S lipo battery, which can bring the drone a stronger flight performance. - Support OSD parameter adjustment, buzzer, led and other functions. - 8g ultra light weight - 25mm * 25.5mm mounting hole, suitable for most frames Package Included: 1 x GEP-F722-45A AIO V2 1 x XT30-7CM-18AWG Power cables 1 x 35V220UF capacitor 1 x SH1.0-6Pin to GH1.25-8Pin cables 8 x M2*6.5mm Damping rings