2.4G 12CH Remote Control Module with Type-C Charging for DIY Projects Wireless Receiver Board Motor Controller

Module Mode Switching Instructions 1. Power on the remote control board and turn on the switch. Press and hold the K2 and K4 buttons simultaneously. The LED will turn off. After approximately 5 seconds, the LED will turn on. At this point, tap the K1 button; the LED will flash. The number of flashes indicates the current mode. Once you have selected the desired mode, release the K2 and K4 buttons. Note: During the mode adjustment process, you must keep buttons K2 and K4 pressed down continuously until you reach the desired mode, then release them. Regarding Remote Control Range This module features a built-in 2.4 GHz antenna that cannot be modified. The tested range in open land areas is approximately 60 meters, and approximately 30 meters underwater. Ensure there are no objects emitting interfering signals near the antenna, such as batteries or various metals. Also, do not place the module inside a metal enclosure, as this will severely interfere with signal transmission. Color: Black Material: ABS Package Contents: 1x Remote Control Module Kit Only the above package content, other products are not included. Note: Light reflection and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.