Description:  The new 220V learning code 6-way remote control switch is upgraded on the basis of the old model, and adopts exquisite industrial control shell design in appearance, and the style is more high-end. The terminal is upgraded. When the interference is strong, the suction cup antenna and the high-sensitivity receiving module can be connected to enhance the signal receiving ability. Chip IC upgrade, using IC that can be burned multiple times, and the program can be changed according to customer requirements. Each relay has an independent working indicator. Another buzzer prompt function.  There is no need to use traditional jumpers or DIP switch coding, just let the receiving controller receive and store the wireless signal transmitted by the remote control, and then the supporting use can be realized. If the learned remote control is lost during use, you only need to clear the information stored in the receiving controller. The lost remote control will not be able to remotely control the receiving controller. If you want to regain the right to use, the owner must regain the right to use it. Re-learn it before use. There are six switchable output modes.  Mainly used in electric doors, windows, lifting equipment, gateways, elevators, industrial control and security industries and other fields.     Specification:  Product name: 220V six-way wireless remote control switch.  Working voltage: AC22V.  Working frequency: 315MHZ/433MHZ (default 315MHZ).  Working mode: Jog M4/Self-locking T4/Lock L4/Jogging and self-locking co-storage code matching mode: Intelligent learning type.  Working environment: -40-+80 degrees.  Receiving sensitivity: -105dBm.  Output current: 3A.  Single weight: 0.17KG.  Dimensions: outer shell: 90* 115*40mm; inner panel: 87*92.6*16.4mm.  Product name: 4000m 6-key remote control.  Working voltage: DC9V (1 9V battery)(Not included battery).  Working frequency 315MHZ/433MHZ (default 315MHZ).  Chip model: 1527 or 2264 (different for different batches).  Encoding type: millions of codes or pad type into a password.  Oscillation resistance: 4.7 (default).  Modulation method: ASK (stable and less interference).  Remote control distance 4000 meters (see the description below for the theoretical value of open and no interference).  Dimensions: 136*42*25mm.  Introduction to the scope of application, suitable for lamps, water pumps, motors, electric doors, windows and other electrical equipment below 100W.      Instructions for use: Working mode and status description:  The receiver has the following 6 working modes can be set, 6-way jog, 6-way self-locking, 6-way interlock, and jog self-locking interlock coexist. 1. Jog: press the remote control button 1 to learn <function literal translation: press and hold the remote control button to work, release it to stop.  2. Self-locking: press the remote control key 3 to learn <function literal translation: that is, the receiver is turned on and off on the same button on the remote control, press the remote control button in turn, the first button is to open, the second is to close The third time is on, the fourth time is off, and so on.  3.