Features: Wide supply voltage range: The built-in intelligent sensing chip of the proximity switch can sensitively detect objects, when proximity switch is close to single target objects, it will send control signal. High frequency: The proximity switch is widely used in automatic control industry for detecting, controlling, and noncontact switching. Sturdy, small volume, convenient installation. The proximity switch has TVS tube protection and strong anti interference ability Can directly connect the transistor and TTLs, and so on logic circuit. This Hall NPN sensor consists of voltage regulator, voltage generator, difference amplifier, Schmitts-trigger and open collectors output. The input are the magnetic induction, the output is a digital voltage signal. Notice: 1.Actual color may be slightly different from the image due to different light effect 2.Please allow 1-3cm deviation due to manual measurement Description: Appearance: M12mm cylinder Output: NPN three wire normally open type The detection distance: 10 mm Supply voltage: 5-24VDC,6-36VDC Output current: 200mA Objects can be detected: permanent magnets Switching frequency: 320 KHZ The shell material: copper Package List: 1x Inductive Proximity Switch Note: Due to the light and screen setting difference, the item's color may be slightly different from the pictures. Please allow slight dimension difference due to different manual measurement. Sold by-DIMEANI official store