2 W Evaluation Kit: This kit includes -LCD-1.3, -10DOF-IMU and -Dual-Expander, etc. Simply connect the 2 W and these two HAT to the GPIO expander board, you can quickly set up a fully functional evaluation platform and start your journey. For 2 W is a low-cost, high-performance microcontroller board with flexible digital interfaces. Upgraded hardware from 2 with wireless communication, onboard antenna, features 2.4GHz 802.11n WIFI and Bluetooth 5.2. Development board uses RP2350 microcontroller chip designed by . Adopts unique dual-core and dual-architecture design: dual-core Arm -M33 processor and dual-core Hazard3 RISC-V processor, flexible clock running up to 150 MHz<br><br>Onboard CYW43439 wireless chip, supports WIFI 4 wireless and Bluetooth 5.2 520KB of , and 4MB of on-board Flash memory Castellated module allows soldering direct to carrier boards USB 1.1 with device and host support Low-power sleep and dormant modes Drag-and-drop programming using mass storage over USB 26 x multi-function GPIO pins 2 x SPI, 2 x I2C, 2 x UART, 3 x 12-bit ADC, 16 x controllable PWM channels Temperature sensor 12 x Programmable I/O (PIO) state machines for custom peripheral support USB cable color is random, No specification accepted Different batches may cause differences in printing/appearance, which not affect the use; the actual product may have color differences due to different lighting or display Material: PCB+components+plastic Color: as shown<br><br>Package Contents: 1 x Development Board (yellow pin headers soldered) 1 x LCD Screen 2 x Expansion Board 1 x Breadboard 1 x USB Cable 1 x Breadboard Cable 3 x Cable 4 x Anti-slip Rubber Particles 1 x Acrylic Shell + Screw Kit<br><br>Only the above package content, other products are not included. Note: Light reflection and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.