Product Description Material: PC + alloy + electronic compnts Size: 20 * 4 * 0.9 cm Induction method: human body infrared induction Delay time: 15 seconds (the light will automatically turn off after 15 seconds after the human body cannot be sensed in the sensing range) Power-on self-test time: 15 seconds Single lamp bead lumens: 22 lm Color temperature: warm yellow light 3000K, positive white light 6000K Induction control: built-in light perception, human body induction Sensing distance: within 3 meters Sensing angle: 120 degrees Charging method: USB charging Color: silver, black Light color: warm yellow light, positive white light Quantity: 2 pieces Package content: 2 pieces * Induction night light (with battery) 1. Motion and Night Sensor The human body infrared sensor mode can detect human movement in the dark or during the day and turn on automatically within 3m, the delay time and power-on self-test time are both 15 seconds, and the light will turn on automatically after 15 C for seconds if the infrared of the human body is not detected within the detection range. It is automatically switched on when the movement within the edge of 3-5 meters and 120 degrees has been detected. It is switched off automatically after 15s if no movement is detected. 2. Stronger and brighter design: lamp life up to 500,000 hours. Energy-saving LEDs, brightness and pleasant to illuminate dark rooms. 3. USB recharge: This cabinet lighting light is built into a large battery. Easily rechargeable via the USB charging cable (included). Charging is red light, fully charged is green light, charging time about 3 hours. Energy saving and savings. Please fully charged when first used. 4. Easy to Install: Built in strong Magnetic, this light can be adsorbed on any iron product directly or installed by magnetic pieces (included), no hard wiring. It's very easy to install and remove. 5. Wide Application: Ideal for the bedroom, closet, closet, workshop, garage, stairwell, hallway, storage room, etc. Better light, better life