Description: Grove sensor kit Shield IOT Board extension WiFi Grove kit Board pms5003 WiFi sensor Remote control shield Module is designed based on by Systems, which is a competitive WiFi solution. The module has the following interface for users, such as UART, IIC,AIO,DIO etc. Grove connector pitch is 2.54mm. The PM5003 connector pitch is 1.27mm (NC,NC,NC,RX,TX,NC,GND,VCC)(Up to Down) WiFi Kit Development Board Kit PMS5003 WiFi Sensor Shield Remote Control Extension Board ESP-12F - Compatible SCM & DIY Kits Module Board Independent research and development, powerful, ultra-low power consumption, can achieve development Specification: Material: Alloy Product detailed size: 5.65x5mm/0.22x0.20inch Parameters 802.11 b/ g/ n wireless standards STA/AP,STA+AP modes support TCP/ IP protocol stack, socket standard TCP/UDP Server and Client serial port baud rate configuration: 1200/2400/4800/9600/19200/38400/57600/74800/115200 bps serial data bits: 5/6/7/8 bits serial parity: none serial stop bits: 1/2 bit GPIO Pinout 0/2/4/5/9/10/12/13/14/15/16 / ADC/ EN/UART TX/ UART RX WiFi operation current: continuous transmission operation: ≈70mA (200mA MAX), idle mode: Serial WiFi transmission rate: 110-460800bps Temperature: -40 ~ + 125 Humidity: 10%-90% non-condensing Package Includes:(3 Pack) 1 Piece Sensor kit