Fully compliant with ZIF specification. Supports 3.3V Mini PCI-e SSD (mSATA module). No extra power adapter or drivers required. Compatible with DOS, Windows 98/SE, 2000, Server 2003, Vista, 7, Server 2008, and Linux. Important Notes: This product supports only 5cm SSDs with mSATA interface via mini PCI-E. mSATA is not the same as 1.8-inch micro-SATA. There are three different pin definitions for mini PCI-E interface SSDs: - mSATA, commonly found in certain laptops and known as an industry-defined interface. - SATA Mini PCI-E, often used in some embedded systems and tablets, also referred to as manufacturer-defined interface. - PATA-defined, which is essentially an IDE interface, typically found in older compact devices. These interfaces appear identical physically and cannot be visually distinguished. Please verify the interface type of your SSD before purchase. Does not support all devices. The cable connection direction is reversed compared to standard hard drive cables. When connecting, ensure the contact side (golden fingers) of the cable faces upward, relative to the orientation of a standard hard drive connection. Note: Product appearance may vary slightly due to manufacturing batches; this does not affect functionality. Color: Green Material: PCB and electronic components Package Contents: 1 x Mini mSATA PCI-E SSD to 40-pin ZIF Adapter Card, 2 x Cables The package includes only the items listed above. Note: Lighting conditions and monitor settings may cause slight variations in color representation between the image and the actual item. Measurement tolerance is +/- 1-3 cm.