["Features:\r\nBattery type: Li-xx (lithium battery) / Ni-xx (nickel cadmium or nickel hydride), the default value is Li-xx (lithium battery).\r\nLow voltage for protection mode: Reduce power / turn off the output, the default is to reduce power.\r\nLow voltage for protection threshold: low / medium / high, the default is the medium cutoff voltage.\r\nWhen the Li-xx battery is set, the number of lithium batteries is automatically determined. The cutoff voltage of each battery in the for case of low/medium/high is: 2.6V, 2.85V, 3.1V.\r\nPlug specification: for T plug\r\n\r\nExtreme use:\r\nContinuous current 30A, instant 35A, 40A for 10 seconds.\r\nDimensions / weight(Approx.):\r\n45*24*11(mm), 25g (including line)\r\nVoltage range: 4V-16V\r\nNumber of batteries: 2-4Lipo (4Lipo does not allow BEC output)\r\n\r\nBEC output:\r\n2A continuous, (instantaneous 3A)\r\n2LIPO 4-5 Miniature steering engine\r\n3LIPO 3-4 Mini steering engine\r\n\r\nSetting method\r\n1. Turn on the transmitter and push the throttle to the highest (FUTABA series transmitters need to use the throttle channel to select REV).\r\n2. Connect the receiver and motor.\r\n3. Turn on the ESC power supply. If the transmitter is normal, the following sounds are available: (If the sound is a long \"beep\" sound after the end of the sound, there is no more sound, then check the transmitter throttle channel reverse setting.)\r\nB B stands for LIPO automatic protection\r\nBB BB stands for NIMH /NICD automatic protection\r\nBBB BBB stands for brake selection\r\n\r\nPackage list:\r\n1x 30A ESC for T plug"]