설명
Hall effect current sensor
No voltage drop and heat on current sensor components
Offset and Sensitivity are calibrated in factory
Made of high-quality materials, sturdy and
Easy to use
Offset and sensitivity are factory calibrated
Continuous current rating: 0~150A DC
Sensitivity: 20mV/A, INAV/ ratio = 200, BATT_AMP_PERVLT = 50
VBAT voltage sensing: 0~69V, INAV ratio = 2100, ratio = 210, BATT_VOLT_MULT = 21.0
Power consumption: 17mA
Voltage offset error at zero current: +-10mV
Current output voltage error: 5%
Operating temperature: -30~80 C
Vbat: for voltage sensing, supports 0~69V IN
Voltage: = 1/21 Vbat, 0~3.3V output
Current: current signal, 0~3.3V output
5V: -150A board power supply, supports 4~13V Input, 17mA
G: GND
TX/RX: For firmware update and configuration (to be supported)
Tip: Hall sensor should be installed away from iron and magnetic materials
(Due to different batches, the printed words on the product will be different, which does not affect use)
Material: PCB
colour: As shown
Package Contents:
1 x Hall Current Sensor
Only the above package content, other products are not included.
Note: Light reflection and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.
-
브랜드:
Unbranded
-
카테고리:
전기 용품
-
Fruugo ID:
319724968-710080376
제품 안전 정보
아래에 설명된 이 제품과 관련된 제품 안전 정보를 참조하십시오.
以下の情報は、この製品を販売する独立したサードパーティ小売業者によって提供されています。
제품 안전 라벨
안전 경고:
Before using this product, please read and understand all instructions carefully.
Health warning: If you feel any discomfort during use, please stop using it immediately and consult a doctor.
Allergy warning: Do not use if you are allergic to any ingredient in this product.
Storage precautions: Please keep this product out of the reach of children.
Expiration date: Please use this product within the expiration date indicated on the package.
재료:
100%
제조업체 부품 번호:
K3099
모델 번호:
K3099
일련번호:
K3099
배치 번호:
K3099
