1306 High-Speed Brushless Motor 3000KV for Model Aircraft Four-Axis Multi-Rotor Crossing Forward & Reverse Flight The new 1306 high-speed model brushless motor with a KV value of 3000 is commonly used in high-speed crossing aircraft models or as a fixed wing aircraft model. The motor is manufactured by a large factory and has good workmanship. It has dynamic balance correction for high-speed vehicles, thickened neodymium magnets, and silicone wires for three-phase leads. The motor shaft has two specifications of threads: positive and negative threads. The threaded shaft is 5mm and can be purchased according to needs. The motor is suitable for working with 2-3S lithium batteries, with a maximum operating current estimated to be around 8A, which is basically the same as the parameters of our other 1406 model. The original configuration is estimated to be designed with 3S, and the blade matching is about 3-3.5 inches. Similar to a previous motor sold by the same manufacturer, the maximum pulling force of 3S battery is about 300g, and the maximum pulling force of 2S battery is about 200g. Tested voltage: DC11.1V The no-load current is approximately 0.5 A, and the no-load speed is approximately 33500 revolutions per minute. The total length of the motor output line is about 55mm, and the motor weighs only 12 grams. _x000D_