1.3inch LCD Display Module For Pico Embedded ST7789 Driver, Using SPI Bus For Pico Header Compatibility Onboard Female Pin Header For Direct Attaching To Pico 1x Joystick And 4x User Buttons For Easy Interacting Operating voltage: 2.6~5.5V Resolution: 240x240 pixels Communication interface: 4-wire SPI Display size: 23.40 x 23.40mm Display panel: IPS Pixel size: 0.0975 x 0.0975mm Driver: ST7789 Dimensions: 52.00 x 26.50mm LCD and the controller The ST7789VW is a single-chip controller/driver for 262K-color, graphic type TFT-LCD. It consists of 240 source line and 320 gate line driving circuits. The resolution of this LCD is 240(H)RGB x 240(V), it supports horizontal mode and vertical mode, and it doesn't use all the RAM of the controller. This LCD accepts 8-bits/9-bits/16-bits/18-bits parallel interface, that are RGB444, RGB565, RGB666. The color format used in demo codes is RGB565. This LCD uses a 4-line SPI interface for reducing GPIO and fast speed.LCD Note: Pico is NOT included. color:Blue Material:PCB Package Contents: 5 x Pico-LCD-1.3