This turn signal relay will solve LED turn signal problems such as hyper flashing, no flashing, or the bulb burnt warning message on the dash, or simply replace a faulty relay.</ p> Features: Eliminate the need to pull wires to install resistors charging. The 2-pin electronic flasher is also speed adjustable, allowing the LED bulbs to flash at normal speed. You can use a flathead screwdriver to adjust the button on the bottom to adjust its flashing speed from 50c/m to 200c/m. Easy Plug & Play installation on most motorcycles. Effective unit with no hassle of excessive heat. Specifications: Color: Orange Quantity: 2 piece Voltage: 12V Maximum power: 45.4W Switch load: 0.1W-45.4W (0.02A~10A) Flashing frequency: 50 to 200 times per minute Operating temperature: -40°C to +80°C Adjustable flashing speed: clockwise (slower); reverse (faster) Item Size: 35*35*25mm/1.38*1.38*0.98in Note: <p >This LED flasher relay works plug & play on most motorcycles with standard 2-pin flasher relays. Package List: 2*2-Pin Flasher Relay