Name: Electronic Drain Valve<br> Indicator Lamp: LED indicating on/off<br> Voltage Range: +/-10%<br> Protection Grade: IP65<br> Insulation: Class H<br> Maximum Working Pressure: 1.6 MPa<br> Maximum Temperature: 90°C<br> Ambient Temperature: -40°C to 60°C<br> Maximum Current Consumption: 4 mA<br> Supply Voltage: 24–240V AC/DC, 50/60 Hz<br> Discharge Time (ON): 0.5–10 seconds<br> Time Interval (OFF): 0.5–45 minutes<br> Widely used in filters, separators, dryers, gas tanks, drip legs, and other compressed air system components<br> Clean the compressed air system before installation<br> Observe flow direction when installing the valve; outlet must not be blocked<br> Ensure supply voltage matches drain valve voltage specification<br> When using DC power, connect positive pole to terminal 1<br> Factory pre-connected cable: brown wire = live (L), blue wire = neutral (N), yellow-green wire = ground (GND)<br> Tighten the screws on the terminal box securely to prevent water ingress<br> Warning: Before installing the electronic drain valve, ensure that the system is depressurized and the power supply is disconnected<br> Color: Gold + Black<br> Material: Metal<br> Size: Aperture: 5 mm<br> Port Size: 1/2 inch<br> Package Contents: 1 x Electronic Drain Valve<br> Note: Other products are not included<br> Note: Lighting and monitor differences may cause slight color variations between image and actual item<br> Measurement error allowance: +/- 1–3 cm