Tip: The chassis switch line and the chassis restart line are the same, and the letters on the back of the product are unified with the word POWER.Light touch ATX chassis power switch cableScope of application: ATX architecture computer, power switch POWER and RESET restart switchTact switch, suitable for POWER switch and RESET restart switch, etc. One end is inserted into the POWER socket of the motherboard, and the other end of the switch can be connected to the chassis panel.How to use:1. Insert the marked POWER end into the corresponding pin of the motherboard;2. The switch terminal is connected to the chassis panel, and it can be used;When the computer case is used for a long time, the Power and Reset buttons will fail, resulting in failures such as failure to boot and repeated booting.This kind of line is used for power supply and reset, and the whole line is about 55cm in length.Some chassis can only be replaced after dismantling, and you must have a certain ability to do it. If you dont understand, please find an expert to replace it. Dont dismantle it rudely to avoid unnecessary losses.