LED lamp with motion and dusk sensor. Built-in PIR sensor (Passive Infra Red - passive infrared sensor) activates the lamp if it detects movement The light sensor will not allow the lamp to turn on if the room is too bright Energy-saving - in the standby mode, the lamp consumes negligible current, after switching on, it lights up for a set time Eye-pleasing design High quality Power supply: 230V - no need to remember to replace the batteries or "pour" them The lamp is NOT hermetic, it cannot be used outdoors, in the bathroom and in places where it is exposed to moisture in the form of water vapor or water and other liquid substances. ATTENTION This lamp cannot be turned on permanently. Possibility to set 1 out of 10 brightness levels. This function is especially useful if you want to create a delicate twilight mood in the room. It works great in a children's room, living room, corridor, on the stairs. The built-in timer allows you to set how long after lighting the lamp will remain on. Lighting time: 30s 60s 90s 120s. Thanks to this solution, the lamp is even more energy-saving. The factory setting after startup/power on is brightness: 5 level lighting time: 1 minute Very simple setup and use of the lamp. Settings are made with one button The built-in on / off button allows you to turn off the lamp without the need to pull it out of the power socket. the shape of the housing thanks to which the lamp takes up only one socket fits most sockets with a "flap" Technical data: power supply: 110-240v power 0.5W - 2.4W (depending on settings) LED color - warm white (color temperature 3000K) number of LEDs: 12 LED lifetime : up to 50,000 hours sensor operation range: up to 6m motion detection angle: up to 150*, the horizontal orientation of the sensor makes the optimal mounting height of the lamp 45-170 cm.