설명
Winds Power Charger Regulator 24v Wind Turbine Generator Controller For Generation System
Feature:
1. Safe Performance: The rectification and braking circuit part uses integrated module design, the heat dissipation and reliability make the performance of the entire system to be safe.
2. Sealed and Waterproof Design: Adopt sealing waterproof design, do not have to worry about the controller is burned after the short circuit, the protection level is IP67, can be used in the air humidity, salinity, stagnant water, etc.
3. Good Heat Dissipation: The outer shell is made of anti corrosion aluminum, and the multi edges floor design increases the heat dissipation area, so that the controller can better dissipate heat.
4. Can charge the Battery: The wind turbine can be controlled to charge the battery, when the battery is full, the wind turbine will brake, and when the voltage drops to the recovery voltage, the charge will be resumed.
5. Multiple Protection: With multiple protections such as waterproof, strong wind, anti reverse connection, and temperature compensation, etc.
6. Wide Applications: Mainly used for wind power generation systems, wind and solar hybrid power generation systems, etc., for engineering or household use.
Specification:
Item Type: Wind Turbine Generator Controller
Product Model: FW10-24
Rated Battery Voltage: 24V
Wind Generator Rated Power: 1000W
Wind Generator Braking Voltage: 30V
Wind Generator Recover Voltage: 27V
Quiescent Current: ≤15mA
Protection Level: IP67
Working Temperature: -35&
8451;-+75&
8451;
Shell Size: Approx. 150 x 132 x 48mm / 5.9 x 5.2 x 1.9in
Package List:
1 x Wind Generator Controller
Note:
1. Confirm that the output voltage of the wind turbine is consistent with the rated voltage of the battery.
2. Connect according to the wiring diagram, first connect the positive and negative poles of the battery, and then connect the 3 phase voltage output of the wind turbine.
3. Please carefully follow the user manual to connect the battery and wind generator to the controller. If you do not connect the battery and the wind generator as required, the reverse polarity or the wrong position will cause damage to the system components.
4. It is strictly forbidden to connect the controller directly to the wind generator before connecting the battery
-
Fruugo ID:
175167447-374482922
-
EAN:
887121746976
제품 안전 정보
아래에 설명된 이 제품과 관련된 제품 안전 정보를 참조하십시오.
以下の情報は、この製品を販売する独立したサードパーティ小売業者によって提供されています。
제품 안전 라벨
안전 경고:
Please note that the product is safe under normal use conditions. However, improper use may lead to hazards such as damage, injury or other safety risks. Please read and follow the instructions carefully.This product complies with EU safety standards. However, for your safety, if any abnormality (such as strange smell, overheating, loose parts, etc.) is found during use, please stop using it immediately.In accordance with the EU General Product Safety Regulation, we remind you that this product is only suitable for [specific applicable people / scenarios]. Use in non - specified people / scenarios may bring potential safety hazards.
