Description: The memory card has the characteristics of small size, large capacity, shock and moisture resistance, high temperature resistance, stable performance, permanent and effective data storage, no noise, no seek error. It is a popular mainstream product memory card. This riser card allows you to use the memory card with this superiority to connect to the standard ATA IDE interface as a standard IDE storage device. Specification: Colour: Black IDE interface: 44PIN Support memory card, 8-64GB Support memory card type: TF, small memory card Size: Approx. 51 x 41 x 3mm / 2.0 x 1.6 x 0.1in Weight: approx. 9g Package list: 1 x Memory Card to IDE Adapter Installation Notes: First install the memory card into the slot, then connect the hard drive data cable to the interface of the notebook hard drive. The power-on detection is normal and can be used. It is so simple, no need to make any driver. Note: For soft routing, the card size is enough within 1G. If you install WIN98, WIN ME, WINXP, or system, the memory card capacity is preferably 2GB or more. If you need high speed, please choose a high-power flash card... otherwise, it will generally be fine. Maximum support for 128G memory card. Please note that the new type and old type of this product will be sent randomly, and make sure you will not mind before ordering. Compliance with standards: Memory card specification Ver2.0, IDE/ATA33 specification. Support DMA and ULTRA DMA mode for DOS / NT4 / WINDOWS98SE / ME / 2000 / XP / VISTA / OSX / Linux systems Standard IDE interface: trueIDE mode, and supports DMA33 transmission mode 44pin/2.0mm male connector: The IDE interface is a 44pin/2.0mm male connector Memory card socket: There are two main control chips on this board, and there is a memory card socket on the back. The memory card can be included with the OS and application software, and the device can be directly activated Advantages: small footprint, compact design and simple operation Compliance with standards: Memory card specification Ver2.0, IDE/ATA33 specification. Support DMA and ULTRA DMA mode for DOS / NT4 / WINDOWS98SE / ME / 2000 / XP / VISTA / OSX / Linux systems Standard IDE interface: trueIDE mode, and supports DMA33 transmission mode 44pin/2.0mm male connector: The IDE interface is a 44pin/2.0mm male connector Memory card socket: There are two main control chips on this board, and there is a memory card socket on the back. The memory card can be included with the OS and application software, and the device can be directly activated Advantages: small footprint, compact design and simple operation