Spectrum Analyzer 100khz To 960mhz,signal Generator Hand Held Frequency Mf/hf/vhf Uhf Input,2.8inch Touch Screen

₩264,590
FREE Shipping

Spectrum Analyzer 100khz To 960mhz,signal Generator Hand Held Frequency Mf/hf/vhf Uhf Input,2.8inch Touch Screen

  • Brand: Unbranded

Spectrum Analyzer 100khz To 960mhz,signal Generator Hand Held Frequency Mf/hf/vhf Uhf Input,2.8inch Touch Screen

  • Brand: Unbranded
Price: ₩264,590
Sold by:
₩264,590
FREE Shipping

In stock

We accept the following payment methods

Description

DIY Supplies : ELECTRICALSpectrum Analyzer 100Khz To 960Mhz,Signal Generator Hand Held Frequency MF/HF/VHF UHF Input,2.8Inch Touch Screen[ESD protection diode] A spectrum analyzer with two inputs, 0.1MHZ-350MHz high-quality MF/HF/VHF input, 240MHz-960MHz low-quality UHF input. Switchable resolution band pass filter, suitable for two ranges between 2.6kHz and 640kHz.[Frequency range] Use a resolution filter to isolate the input power in a small frequency range. The fastest scanning speed occurs at RBW or 300kHz or wider frequencies, about 2 scans per second. The resolution filter scans in the desired frequency range. But as the frequency span increases and the RBW decreases, the scanning speed decreases rapidly. It takes about 2 minutes to scan from 0MHz to 350MHz with an RBW of 10kHz.[4 input/output specification modes] The input/output specification of tinySA is divided into 4 modes: low input mode, high input mode, low output mode, and high output mode. The firmware of tinySA can be updated by the user. If you need a new version of the firmware, please contact us for the download link.[Built-in calibration signal generator] This network analyzer can be used as a signal generator. When it is not used as a spectrum analyzer, the MF/HF/VHF sine output is between 0.1MHZ-350MHz, and the UHF square wave output is between 240MHz-960MHz. The color display shows 290 scanning points, covering the entire low-frequency or high-frequency range. The built-in calibration signal generator is used for automatic self-check and low-input calibration.[PC Control]Connect to PC via USB to become a PC-controlled spectrum analyzer. The USB interface implements the Serial over USB (CDC) protocol, and there are a large number of commands that can be called through the serial interface. These commands can be used to perform measurements or update internal settings. After connecting to a Windows PC, the Windows driver will be installed automatically. The Linux driver is built into the kernel.Material:Metalcolour:BlackPackage Contents:1 set x Spectrum AnalyzerOnly the above package content, other products are not included.Note: Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.
  • Fruugo ID: 227407681-485060217
  • EAN: 889614584904

Delivery & Returns

Dispatched within 3 days

  • STANDARD: FREE - Delivery between Wed 05 November 2025–Tue 11 November 2025 - FREE

Shipping from China.

We do our best to ensure that the products that you order are delivered to you in full and according to your specifications. However, should you receive an incomplete order, or items different from the ones you ordered, or there is some other reason why you are not satisfied with the order, you may return the order, or any products included in the order, and receive a full refund for the items. View full return policy

Product Compliance Details

Please see the compliance information specific to this product outlined below.

The following information is provided by the independent third-party retailer selling this product.

Manufacturer
The following information outlines the contact details for the manufacturer of the relevant product sold on Fruugo.

  • Fuzhouhaichengshengchangmaoyiyouxiangongsi
  • Fuzhouhaichengshengchangmaoyiyouxiangongsi
  • maweiqu junzhulu83hao kaifaqukejifazhanzhogxindalou disiceng E481shi
  • Fuzhou
  • CN
  • 350015
  • 755120680@qq.com
  • 8615280094726

Responsible Person in the EU
The following information outlines the contact information for the responsible person in the EU. The responsible person is the designated economic operator based in the EU who is responsible for the compliance obligations relating to the relevant product sold into the European Union.

  • EC REP SERVICES SL
  • EC REP SERVICES SL
  • C/GRAN VIA 49, 7 DCH
  • MADRID
  • ES
  • 28013
  • ECREPSERVICE@HOTMAIL.COM
  • 34 910563102