M5Stack StickC Plus RF 2-in-1 Module NRF24 2.4GHz CC1101 433MHz Bruce Firmware Description: This dual-mode RF development board is specially designed for the M5Stack StickC Plus2, integrating both A01-S2G4A00S2A (2.4GHz NRF24) and A07-S433A10S2A (433MHz CC1101) modules. Fully compatible with Bruce firmware, it features a plug-and-play design and supports both short-range and long-range wireless communication, making it ideal for IoT, wireless control, and RF development projects. Features: Dual-module design: supports both NRF24 (2.4GHz) and CC1101 (433MHz) communication. Tailored for M5Stack StickC Plus2, plug-and-play. Bruce firmware compatible, no complex setup required. High-performance RF communication for reliable data transmission. Physical switch for easy module selection. Module Details: 2.4GHz NRF24 Module (A01-S2G4A00S2A): stable, high-speed short-range wireless communication 433MHz CC1101 Module (A07-S433A10S2A): low-power, long-range RF transmission Reliable performance with optimized signal layout and power design Usage Instructions: 1. Flash Bruce Firmware (First-Time Setup): To use this board with StickC Plus2, first flash the Bruce firmware. Follow the instructions to select the correct device (StickC Plus v1.1/v2) and complete the flashing process 2. Hardware Connection: Connect the RF board to the M5Stack StickC Plus2 using the Grove cable or GPIO jumper wires. The GPIO pin-out is pre-configured and compatible with Bruce firmware. 3. Switching Between Modules: This board includes a physical switch to toggle between the two RF modules. Package Included(1): 1xRF Module 2x Antennas 1xPin Cable Package Included(2): 1xRF Module 2xAntennas 1xPin Cable 1xShell Note: Due to the light and screen setting difference, the item's color may be slightly different from the pictures. Please allow slight dimension difference due to different manual measurement. Sold by-DIMEANI official store