Features: 1. Diagnostic via CAN and special functions via K-Line. 2. Covers all electronic control units in vehicles (diagnostic addresses from 0x01 to 0x80). Enables access and diagnosis of advanced units not supported by other diagnostic tools. Functions operate under CAN-TP2.0. 3. Manual definition of active diagnostic session C, unlike standard diagnostic session 0x89 used by other tools. Function operates under CAN-TP2.0. 4. Diagnostic request to disable normal communication, clear DTCs, and activate logistic (transport) mode. Functions operate under CAN-TP2.0. 5. Supports management of new control units, including immobilizer units, allowing programming of PIN, BGW, and related parameters. Functions operate under CAN-TP2.0. Supports common diagnostic requests including identification, coding, adaptations, and DTC handling. K+CAN Commander Software version 1.4. Diagnostic cable enables diagnosis via CAN and special functions via K-Line. Compatible with models up to September 2006 for certain vehicle makes via CAN. Compatible with specific models up to 2007. Functions: 1. Odometer correction in instrument clusters and EDC15x. 2. Read security access code/login WFS. 3. Read and program immobilizer data. 4. Read and write EEPROM from instrument cluster and immobilizer. Supports all compatible CAN/K clusters. 5. MMI TV activation. 6. Read and write EEPROM of engine control units - EDC15x, ME7.1.1, Cartronic ME7.8. 7. Key learning with simplified button operation (no security code required). Supports component security authorization. 8. Key learning for K+CAN systems (no security code required). 9. Custom memory reading from various units including ECUs, EZS, Kessy. 10. Read flash memories including EDC16x, EDC15x, ME7x, MED951, MED751. Flash memory programming available with appropriate setup. 11. Clear crash data in control units. Color: Black Material: ABS Package Contents: 1 x K+CAN Commander V1.4 Cable 1 x CD Driver Note: Light reflection and different display settings may cause the color of the item to appear slightly different from the actual product. Measurement may vary by +/- 1-3 cm.