Five-in-one Soil Meter EC Conductivity Temperature/Humidity PH Tester Orchard Planting Detector 5 in 1 Soil Analyzer (Temperature/Humidity/Illuminance/PH/Water Content) One, The machine is a multifunctional electronic digital soil analyzer. This is a widely used device for measuring soil planting. The long enough aluminum alloy probe can adapt to different soil conditions. Suitable for flowers and grass, landscaping, planting vegetables, etc. 2. Product Features: Large-screen digital display interface Aluminum probe long enough to adapt to various soil environments Convenient temperature metric conversion function Low power reminder function Power-saving automatic shutdown function: automatic shutdown for 5 minutes without any operation Easy to operate, adjustable reading angle to facilitate various groups of people and usage habits 3. Product parameters: Product size: 77*77*33mm/ Working temperature: 5-40 Power supply: 9V battery (battery not sent) Package size: 300*80*40MM Manual: English manual 1. Measuring current intensity indicator light: LOW-.LOW.LOW +. NOR-.NOR.NOR+. HGH-.HGH.HGH+ 2. Measure soil moisture: dry+.dry.no.wet.wet+ 3. Measuring soil temperature range: -9-50 (16-122), accuracy: 1/ 1 4. Measuring soil pH range: 3.5-9.0 5. Measure environmental soil moisture, temperature percentage 4. Product Description: Please install the battery and remove the probe cover before use 1. Illuminance measurement a. Press the "ON" button to turn on the instrument. b. Align the highest point light source photosensor window. c. The current light intensity will be displayed on the LCD. NOTE: Please do not block to block light or create shadows on the light sensor. 2. pH range measurement a. Press the [ph/c] button on the back to the ph position. b. Insert the probe vertically into the soil and test as soon as possible. c. Press the [ON] button to start measuring d. The pH value of the test will be displayed on the LCD. e. Take multiple measurements to obtain the desired accurate value. NOTE: Insert the probe vertically, in the middle of the edge of the plant stem. Push gently into the soil so as not to damage the probe. If the measured soil is too dry or fertile to measure an accurate pH value, the user can sprinkle some water, half an hour and then measure again later. 3. Temperature measurement a. When measuring the temperature, the soil temperature value will be displayed on the LCD at the same time. b. Press the (C/F off) button to set the humidity display to "C or F". NOTE: If the user does not insert the probe into the soil, the accurate ambient temperature of the outside space is displayed. 4. Moisture measurement a. Press the (ph/c) button on the back to the "C" position. b. Insert as vertically into the soil as possible. c. Press the "No" button to start the measurement. d. The measured soil moisture value will be displayed on the LCD screen.e. Take multiple measurements to obtain the desired accurate value. 5. Environmental humidity measurement After powering on, press the (ph/c) button on the back to the C position, which is the ambient humidity. The numbers will be displayed on the LCD Packing: 1x 5 in 1 Soil Meter