[Adjustable Bias Tape Binding Foot]: The bias tape binding foot is equipped with a small folded channel, which we can use to finish the binding process. This bias tape presser foot is suitable for nearly all low-shank snap-on sewing machines, whether it is an industrial sewing machine or a household sewing machine. [Fit Most Sewing Scenes]: With a wide adjustment size, you can adjust the sewing machine presser foot to allow its sewing width to be 0.5-2CM.Which is suitable for almost all sewing scenes requiring binding, As long as you have our presser foot, your sewing machine can handle them all. [How to Use]: Firstly, adjust the size of the presser foot binding. Secondly, fold and iron the binding cloth. Then you only need to put pre-folded bias tape in the channel, and put in the edge of the cloth, which needs to be bound. [Precision Ddesign]: Our bias tape presser foot is made of metal and plastic. Unlike the old-fashioned binding presser foot, you can see your cloth through the transparent plastic compartment, ensuring accurate binding width and reducing the difficulty of sewing. The surface is smooth and has no thorns, so it will not scratch your sewing products. [Easy to Install and Adjust]: Just press the bias tape presser foot to the corresponding position of the sewing machine and it can be used immediately. The whole process is very simple. If you want to adjust the seam allowance width, just loosen the screw slightly to adjust the presser foot width.